Flour testing equipment hammer type cyclone grinding mill
Introduction:
This product is a fully automatic, equipped with automatic feeder, according to a predetermined speed automatic feed.Crushed by this machine samples (by) samples with different pore size of the sieve plate, suitable for the determination of gluten quantity, quality, land value, near infrared composition, viscosity of grain and other precision requirement of sample preparation and determination of the indicators and analysis.
Performance characteristics:
1, the sample was 16800 r/min high-speed grinding hammer into powder, and with the high speed air flow through the stainless steel sieve plate into the stainless steel integrator into uniform sample;
2, the casing with advanced XiGeYin materials, noise lower than similar products at home and abroad;
3, a built-in motor temperature protections circuit, once the motor more than set temperature, will automatically stop;
4, sample pieces with functions of automatic high-speed airflow cleaning grinding chamber, do not need to manually in the sample pieces to cease;
Five samples and irregular shape larger particles (such as big grain corn), must be approved by laboratory grinding mill grinding processing beforehand or into feed grinding;
6, the high speed air flow in the process of hammer crushing, will cause the loss of sample moisture, general water cut of 10-20% of the sample, will be lost in the process of crushing the 5-10% of the water.
Technical note:
1, the power supply voltage: AC220 plus or minus 10 v
2, working frequency: 50 hz
3, motor power: 750 w
4, studio in diameter: 110 mm
5, grinding hammer speed: 16800 r/min
6, sieve plate: 0.5 mm, 0.8 mm and 1.5 mm
Related product:
Falling number tester
Product Description:
This instrument is suitable for corn, wheat flour and other products containing starch to the measurement of α - the activity of amylase in grain storage is, flour processing, food processing and so on in the field of quality verification of important measuring instrument.
Specification:
1. The studio shall be clean, ventilated and non-corrosive gases;
Working environment temperature: 10ºC~ 35ºC;
2. Relative humidity <80%;
3. There should be no strong magnetic field and vibration in the room;
4. Power supply: AC220V ±11V, 50HZ.
Technical parameters
1. Weight of stirring rod: 25g±0.05g;
2. Viscosity tube size:
Internal diameter d= 21 mm ± 0.02mm
Outer diameter D = 23.8 mm±0.25 mm
Internal wall height h= 220mm ±0.3mm;
3. Heater power: 600W;
4. Measurement error: <5%;
5. Device dimensions: 300mm (length) X420mm (wide) X420mm (high);
6. Instrument weight: 25 kg.
Our Service:
1,We will provide all the details to you during the massproduction
2,Customize your mould according to your need if have considerable orders
3,Your requirements and complaints are highly respected
Certifications:
){kind=link}
){kind=link}